| Wavelength |
473nm |
| Output power |
50mW |
| Spatial mode |
TEM00(M2<1.1) |
| State of polarization |
Longitudinal multi mode |
| Beam waist diameter(1/e2) |
0.10±0.01mm |
| Beam waist position |
-37±5mm |
| Beam divergence angle |
<7.3mrad |
| Beam circularity |
1±0.15 |
| Power stability |
≦±2％(>8hour)(<±0.5％@constant temperature) |
| Noise |
<0.5％rms(10Hz～100MHz) |
| Pointing stability |
<20μrad/℃ |
| Line width |
<10MHz(<0.01pm) |
| Wavelength drift |
<50MHz/℃ |
| Polarization ratio |
>100：1 (vertical) |
| Warm-up time |
<5分 (power-on), <10秒(stan-by mode) |
| Beam height |
19mm |
| Operation temperature |
Laser head：10 to 40℃(<80％RH), controller：10 to 45℃(<90％RH) |
| Storage temperature |
-20℃ to +60℃(<90％RH, no condensation) |
| Cable length |
1m |
| Beam alighnment tolerance |
Output position accuracy<±0.5mm、output angular accuracy<±5mrad |
| Dimensions of the oscillator |
95mm×28mm×36.5mm |
| Dimensions of power supply |
138mm×99.4mm×33.5mm |
| Input voltage |
＋5V DC±5％(ripple<3％p-p) |
| Electrical power consumption |
<35W |
| Interface |
Laser ON and OFF, output power adjustment, output power monitering, LD erctric cuurent monitoring, laser OK signal, LD alarm signal |
| Class of JIS |
3B |
| Supplemental note |
※Heat sink is necessary for using. ※Domestic sales only in Japan. |