Oblique Stages

ATD-120-HP

3
Two axis Oblique Stages
Estimate separately
Travel Arm shaft±15°,Lower shaft±10°
Stage size 125mm×125mm
Resolution 0.002°

Product documentation

Description

Stage two is the amount of inclination of the axis height and move the center of rotation is different.
You are using the VB Guide rail for our own inclination.
Widely available to use precise camera positioning, and sensors.

Specifications

Direction of travel Two tilting directions
Travel Arm shaft±15°,Lower shaft±10°
Stage size 125mm×125mm
Motor used PK545NBW(New Pentagon (Bipolar) connection type,5lead wires,0.75A/phase)
Resolution 0.002°
Transfer mechanism Worm Gear Mechanism
Guiding method V-grooved ways and steel ball
Positioning accuracy 0.025°
Repeatability ±0.002°
Stage height 95mm
Center of rotation 112mm
Lost motion 0.002°
Moment rigidity Yawing rigidity 0.4sec/N・cm
Load capacity 78.4N(8kgf)
Weight 5.4kg
Maximum speed 10°/s
Material / Surface treatment Aluminum alloy/White Alumite
ORG sensor Normally open contact (make contact, A contact) operation.Photomicro Sensors
Pre-ORG sensor Normally closed contact (Break contact, B contact) operation.Photomicro Sensors
Limit sensor Normally closed contact (Break contact, B contact) operation.Photomicro Sensors
Compatible cable ACB-STD2,ACB-STD3

Connection method- Cable, Controller and Driver -

Operating principle of the Sensor and Timing Chart