Oblique Stages

ATD-C312-EM

3
Two axis Oblique Stages
Estimate separately
Travel Arm shaft±8°,Lower shaft±6°
Stage size 30mm×30mm
Resolution Arm shaft0.001488°,Lower shaft0.001113°

Product documentation

Description

Stage height and tilt movement is the center of rotation is different.
Very fine and smooth operation is possible by our own complex coupling mechanism.
Widely available to use precise camera positioning, and sensors.

Specifications

Direction of travel Two tilting directions
Travel Arm shaft±8°,Lower shaft±6°
Stage size 30mm×30mm
Motor used PK513PB(New Pentagon (Bipolar) connection type,5lead wires,0.35A/phase)
Resolution Arm shaft0.001488°,Lower shaft0.001113°
Lead screw 0.5mm
Transfer mechanism Composite coupling mechanism/Feed screws
Guiding method Dovetail
Positioning accuracy 0.05°
Repeatability ±0.003°
Stage height 31mm(Without spacer27mm)
Center of rotation 26mm(Without spacer30mm)
Lost motion 0.05°
Load capacity 9.8N(1kgf)
Weight 0.6kg
Maximum speed Arm shaft7.4°/s,Lower shaft5.6°/s
Material / Surface treatment Brass/Black hard chrome
ORG sensor Normally open contact (make contact, A contact) operation.hall IC
Limit sensor Normally open contact (make contact, A contact) operation.hall IC
Compatible cable ACB-STS2

Connection method- Cable, Controller and Driver -

Operating principle of the Sensor and Timing Chart