Measure NAVI -CHUO PRECISION INDUSTRIAL CO.,LTD.-

IMS-MN03

1

Measure NAVI

Estimate separately

Product documentation

▲PAGE TOP

Features

Major NAVI is the imaging microscope with the integrated LCD monitor, which was developed with the three major themes, tireless, simple, and convenient.
Due to the LCD provided, the image and the coordinate can be checked on the monitor simultaneously without looking into the field lens. Therefore, fatigue of the operator can be greatly reduced.
With the power being turned on, the system can be operated easily without carefully reading the manual. The screen image and the measurement data can be easily recorded in the USB memory.
By using the stage with the clutch-mechanism, transfer of the sample can be quickly done.
For incident/permeation illumination, long-lasting LED is applied. The monitor brightness is automatically controlled.

▲PAGE TOP

Specification

Optical system	Object lens	Infinity tube length optical system standard object lens5 x WD22.5mm (10x, 20x)
	Observing monitor	Erect image5 x monitor magnification when the object lens is used Approx. 38 times
	Illumination system	Bright field vertical incident illumination and permeation illumination
	Light source	High power LED lamp White color Color temperature 5500K
Focusing function	Moving amount	190㎜
Observing monitor	Monitor	10.4inch LCD
	Pixel count	800×600
	Pixel pitch	0.264㎜×0.264㎜
	Display area	211.2㎜×158.4㎜
	Contrast	450：1
	Super impose	XY position data display (minimum unit0.0001mm）
	Electron line form	9 types select display (cross line 3 types, registration mark 4 types, dual registration mark 2 types), non-display
	Electron line color	5 colors (white, black, red, blue, green)
Camera section	Camera	1/2 inch CMOS color camera (1.3 million pixel)
	Interface	USB2.0 interface complied
	Pixel count	1280×1024
Measuring stage	Moving amount	X axis：100㎜、Y axis：50㎜　0.0001mm resolution linear scale mounted
	Measurement accuracy	X axis：0.006㎜、Y axis：0.005㎜
	Stage glass size	165㎜×115㎜
	Moving mechanism	Manual handle　Clutch type forwarding mechanism mounted
Image record	Media	Save to USB memory
Image record	Record mode	3 type (coordinate/image/ coordinate & image)
Main body	Weight	Base section 15.6㎏　Stage section 8.5㎏　Mirror tube section 5.6㎏（total29.7㎏）
Main body	Power source	AC100V～AC240V 50/60Hz 130VA

▲PAGE TOP

Integration of the monitor and the camera

The first imaging microscope in Japan that LCD and the digital camera are built in to the microscope unit. The camera is applying CMOS with 1.3 million pixels and transfer the data in high speed via USB.

Various measurement electron line

Electron lines of different five colors and nine shapes are selectable. The suitable line can be selected that matches the sample color and shape.

Eye-friendly LCD

By applying 10.4 inch LCD, an image and coordinate data can be displayed. It does not overlap with the observing image; therefore, positioning is easily done, and moving amount of the operators' vision line stays at the minimum.

LCD body with ergonomic design

LCD can be adjusted with height (up/down) and angle (two-degree-of-freedom) freely as required by the operator at any installation position.

Easy "observing" performance

As the standard specification, the object lens with 5x is installed. At this time, monitor magnification is approximately 38 times larger, and the field of view is 4.4 x 3.2 mm.

LED illumination is installed as the standard specification

High-power white LED is applied for the optical source; lamp replacement is unnecessary due to its long operating life. Permeation and incident illumination are both available as the standard specification.

Easy recording to USB memory

With the USB memory slot provided, data exchange with the PC became easy. Even without PC, it is possible to acquire the measurement.

Quick stage transfer with the clutch mechanism

With the clutch-forwarding mechanism attached, quick stage transfer is available by releasing the lock; therefore, quicker and safer sample preparation is possible.

Equipping the high specification stage

On the 100 x 50 mm stage, the linear scale with 0.0001 mm resolution is mounted. The stage glass size is 165 x 115 mm, and the rotation stage can be also mounted.

User-friendly operation panel which the manual is even unnecessary

Usability was sought by locating all switches to the front panel. All operations are available without being bothered by waste motions; thus concentrated measurement can be achieved.